Swing Carriages

Swing Carriages - The maximum load capacity for forklift jibs in both the retracted or extended positions range beginning from 1935 pounds to as much as 6000 lbs. It is a good suggestion to ask a material handling specialist regarding the limits for your specific application. The load capacity ratings are really intended for the jib itself and not the lift truck or even the maximum load which can be moved safely making use of a particular lift truck. It is essential to remember that whenever any attachments like for instance a lift truck jib are added to the lift truck, the new center of gravity created by the accessory will reduce the general lift capacity of the forklift. There are guidelines available which offer information on how to correctly calculate these load limits.

Prior to using a lift truck jib, make sure that it is properly secured to the lift truck using hooks and shackles. Constantly double check to verify that the screw pins are tight. It is vital to also make sure that the load calculations have been made properly. Remember to take into consideration the truth that rated capacities at times decrease each time the boom is in a raised position, when the boom is fully extended with telehandlers or when the mast is slanted forward.

Important suggestions every time you are making use of an adjustable jib is to never pull a load utilizing this particular type of attachment. These kinds of attachments are just used for vertical lifting. Moreover, avoid letting the load move to and fro. Use extreme caution each and every time a load is carried to prevent tipping over the truck.

Click to Download the pdf

Forklift Parts

Attachments for Gradall Forklift

Attachments for Gradall Forklifts - Throughout the period when World War II caused a shortage of laborers, the famous Gradall excavator was established in the 1940s as the creation of two brothers Koop and Ray Ferwerda. Partners in a Cleveland, Surprise construction business called Ferwerda-Werba-Ferwerda, the brothers faced a huge predicament when a lot of men left the workforce and...

More

---

Parts for Hydraulic Boom Lifts

Hydraulic Boom Lift Part - Telehandlers or Shooting Forklift Booms Shooting forklift booms may also be known as telescopic booms or telehandlers and are very useful on rough terrains. This particular type of boom could hoist staff to heights of twenty to forty feet. These booms are normally utilized outside on construction sites or within the agricultural industry. Booms Must...

More

---

Parts for Rough Terrain Forklift

Parts for Rough Terrain Forklifts - There are in fact two different classifications of lift trucks within the materials handling market, the industrial model and the rough terrain model. Rough terrain lift trucks first arrived on the marketplace in the 1940's and were primarily utilized on rough roads, perfect for areas where no paved roads were available, like building sites...

More

---

Attachment for Knuckle Boom

Knuckle Boom Attachments - Businesses usually have to carry, transfer, and stock up extremely heavy cargo. Load sizes from 5 to 10 tons which have to be transferred using dependable equipment that could load and support itself. To resolve these issues, very large Boom Trucks were invented so as to do these huge jobs. There are lots of various models...

More

---

Parts for Stacker Forklift

Stacker Forklift Parts - A type of compact forklift, the electric stacker is used to work in smaller areas, making loading and lifting a lot easier on the warehouse worker. Normally wide, but flat objects like tubes, slabs and pallets are transported using this piece of equipment. There are metallic prongs jutting out horizontally from the body of the electrical...

More

---

Crown Forklift Parts

Crown Forklift Part - The Crown company was founded in 1945 by two brothers, Allen A. Dicke and the late Carl H. Dicke. Carl's son and Chairman Emeritus, James F. Dicke, joined the family business later on that same year. Presently, his son, James F. Dicke II, is Chairman and CEO. James F. Dicke III, serves as the company Head...

More

---

Parts for Walkie Stackers

Parts for Walkie Stacker - A pallet stacker is a type of pallet jack that is employed to transport, stack and lift palletized goods that are overly heavy for manual lifting. Its main purpose is to load and unload pallets on trucks, and also transferring pallets to and from a variety of places within a storeroom space or warehouse. For...

More

---

Parts for Gas Forklift

Part for Gas Forklift - In the year 1893, inventor Rudolf Diesel developed the diesel engine. The combustion engine functions by providing the heat of compression in order to burn the fuel and initiate ignition. Then the fuel is injected into the combustion chamber. This design is in contrast to spark ignition engines, like for instance gasoline or petrol engines...

More

---